Omigo can be cleaned with your typical household cleaners (while we recommend more mild detergents such as dish soap, Simple Green, or Windex) and a soft damp cloth. Simply remember to unplug your Omigo from the power source before cleaning.
Do not scrub or use harsh, abrasive products to clean your Omigo. Do not use thinner, benzene, acidic chemicals, chlorine, or hydrochloric acid detergent. This may result in corrosion to the metal parts or discoloration or scratches to the Omigo body.
How to remove your Omigo for a thorough cleaning
First, unplug your Omigo!
To remove the seat, press the Quick-Release button on the left side of the unit and slide forward off of the mounting plate and toilet.
How to clean the nozzles
Although the Omigo nozzles are self-cleaning, we recommend they be cleaned with a soft toothbrush monthly or as needed.
- Press the Nozzle Cleaning auxiliary button (on the side of the seat). The front wash nozzle will fully extend. Gently clean with a soft cloth or toothbrush.
- Press the Nozzle Cleaning button again and the front wash nozzle will retract and rear wash nozzle will fully extend. Gently clean with a soft cloth or toothbrush.
- Press the Nozzle Cleaning button a third time and the rear nozzle will retract back into the seat. Take care when cleaning the nozzles; do not apply too much pressure to avoid damaging the nozzle system.
How to clean the mesh filter
Cleaning intervals will differ depending on use and water quality. It is recommended to check the filter at least once a year.
- Turn off the water supply and hold the toilet's flush lever down until all of the water has drained from the tank.
- Unplug the Omigo, remove the seat from the toilet using the Quick-Release button on the left side of the unit, and disconnect the hose. You may want to use a bucket to catch any dripping water from the hose.
- Remove the mesh filter from the water inlet with a pair of tweezers or needle-nosed pliers.
- Clean the filter with a toothbrush while running under tap water to effectively remove any foreign substances or build-up.
- Replace the mesh filter and carefully check that it is installed correctly. If improperly installed, it could result in the Omigo leaking water.
- Reconnect the hose and place the seat back on the toilet. Plug the cord back in, and turn the water supply back on.
Be cautious of leaving home and beauty products in contact with the Omigo seat, the result of which can be irreversible discoloration. Most stains can be removed using a 1:1 mix of rubbing alcohol and water and a soft cloth or towel. Wash off any substances that come in contact with the seat as soon as possible. If necessary, replacement seat parts can be purchased through an Omigo Agent.