By default, your Omigo will arrive with the seat sensor activated. Turning off the seat sensor bypasses the body sensor located in the seat, allowing wash, dry, and deodorizing functions to operate without sitting on the seat. Use caution in this mode!
How to turn the seat sensor on/off:
1. Press and hold down the Power and Rear Cleansing auxiliary buttons simultaneously for approximately 5 seconds until one or more of the seat display lights start flashing.
2. Press the Nozzle Cleaning button to Set or Cancel the Seat Sensor Lock Mode.
3. If the Seat Temp indicator light is flashing, Seat Sensor Lock Mode is ON. Someone will need to be sitting on the seat for Omigo to operate a wash & dry cycle. If the Seat Temp indicator light is not flashing, Seat Sensor Lock Mode is OFF. Someone does not need to be sitting on the seat for Omigo to operate a wash & dry cycle.
4. The new setting will automatically be saved within 10 seconds if no other buttons are pressed, or if you press the Stop button on the remote control.