The “Let’s Go” function activates an automatic wash and dry cycle. The functions are preset to:
- 90 second Front or Rear wash with oscillation
- Medium (pink) water temperature
- Medium (pink) spray width
- High water pressure
- 2 minute warm air dryer cycle set to medium temperature
Note that these settings are preset but can be adjusted during the cycle.
Pro Tip: Tell timid guests or new users to press the “Let’s Go” button for a perfect wash and dry every time.
How to program and operate User 1 or User 2:
Two User Memory Settings - one for you, one for your BFF! Personalize your favorite settings (nozzle position, water temperature, spray width, etc.) for a custom experience.
- Sit on the seat.
- Press and release either the Rear or Front wash button - a wash cycle will start.
- While the wash is operating, set your favorite nozzle position, water temperature, spray width, water pressure, and oscillation option.
- Finish the wash or press Stop. Then, press and hold the User 1 or User 2 button on the remote for 5 seconds to save the programming. A beep will sound when the setting has been saved.
- Use your custom setting by pressing either User 1 or User 2 and then either the Front or Rear button to start a wash.