How do I adjust the seat temperature?
Our bidet seats have 4 seat temperature settings. Press the Seat Temp button to cycle through each temperature.
Omigo & Omigo SL
- Off
- Low - 89° F (blue)
- Medium - 93° F (pink)
- High - 97° F (red)
Omigo GS
- Off
- Low - 93° F (green)
- Medium - 100° F (yellow)
- High - 108° F (red)
Does the seat stay heated all the time?
Seat temperature stays on the last used setting, and can be adjusted every time you sit down.
Omigo and Omigo SL also feature an Eco Mode that sets the seat temp to the lowest setting when not in use and will heat back to the previous temperature setting once you sit back down.
Omigo GS features two Eco Mode options: Standard (seat and water temp is set to 89.6 °F when not in use) and High-Efficiency (seat and water temp is turned off when not in use).
Do seats have a soft-close lid?
Yes! All our bidet seats feature a gentle, soft closing seat and lid, and all seats support up to 330 lbs. The Omigo & Omigo SL lid is sittable and sturdy enough to support up to 270 lbs. The Omigo GS lid supports up to 160 lbs.
How should I clean the seat?
For a quick clean, unplug your bidet seat before using a soft, damp cloth and mild cleanser (such as Method or Windex) to wipe it down. For a deeper clean, use the Quick-Release button on the side of the seat for easy removal and cleaning of the entire seat and toilet.
How to turn the sounds on/off:
By default, your bidet seat will chime to confirm commands, but you can also turn the sounds off.
Omigo & Omigo SL
- Press and hold down the Power and Rear Cleansing auxiliary buttons simultaneously for 5 seconds until one or more of the seat display lights start flashing.
- Press the Power button to Set or Cancel the Silent Mode. If the Power indicator light is flashing, Silent Mode is ON. If Power indicator light is turned off, Silent Mode is OFF.
- The new setting will automatically be saved within 10 seconds if no other buttons are pressed, or if you press the Stop button on the remote control.
Omigo GS
- To activate Silent Mode, press and hold the “ – “ Water Pressure/Dry Temp button for four seconds. A beep will sound to indicate that Silent Mode has been activated.
- To deactivate Silent Mode, press and hold the “ – “ Water Pressure/Dry Temp button for four seconds. Two beeps will sound to indicate that Silent Mode has been deactivated.
How to turn the seat sensor on/off:
By default, your bidet seat will arrive with the seat sensor activated. Turning off the seat sensor bypasses the body sensor located in the seat, allowing wash, dry, and deodorizing functions to operate without sitting on the seat. Use caution in this mode!
Omigo & Omigo SL
- Press and hold down the Power and Rear Cleansing auxiliary buttons simultaneously for approximately 5 seconds until one or more of the seat display lights start flashing.
- Press the Nozzle Cleaning button to Set or Cancel the Seat Sensor Lock Mode.
- If the Seat Temp indicator light is flashing, Seat Sensor Lock Mode is ON. If the Seat Temp indicator light is not flashing, Seat Sensor Lock Mode is OFF.
- The new setting will automatically be saved within 10 seconds if no other buttons are pressed, or if you press the Stop button on the remote control.
Omigo GS
- To activate the Seat Sensor Override, press and hold the Pulse button for four seconds. A beep will sound to indicate that the seat sensor has been turned off. The Nozzle Position and Water Pressure/Dry Temp lights will stay on as long as Seat Sensor Override is activated.
- To deactivate the Seat Sensor Override, press and hold the Pulse button for four seconds. Two beeps will sound and the Nozzle Position and Water Pressure/Dry Temp lights will turn off.
- Note: The bidet cannot be put into Silent Mode while Seat Sensor Override is activated. Nozzle Cleaning will not work when Seat Sensor Override is activated. To initiate Nozzle Cleaning you must first deactivate Seat Sensor Override.
